SHARP - FIL


SHARP - FIL


  • Characteristics

It is a copper coated continuous solid wire for MIG/CO2 welding type. It gives smooth flow, stable arc and minimum spatter under optimum welding conditions. It is used for welding for structural steels with tensile strength upto 540 N/mm2.

    Designation of standards
  • AWS ER 70S-6
    Mechanical properties
  • Tensile Strength 500 N/mm2 / min
  • Yield Point 420 N/mm2 / min
  • Elongation, (L=4d) 22 % / min
  • Impact Value, CVN 55 J min at 00C
  • Shielding Gas CO2 Flow rate 15 to 30 litres / min
  • Standard Wire Diameter 0.8 mm, 1.0 mm, 1.2 mm, 1.6 mm, 2.0 mm
  • Welding Positions Down hand / Horizontal / Vertical
Product Description
Bridges
Construction Equipment
Corten Steel Sheets
Machinery
C 0.07 to 0.15
Mn 1.4 to 1.8
Si 0.8 to 1.1
Cu 0.5
S 0.03
P 0.03